Difference between revisions of "Slurm-web Installation"
From Supercomputación y Cálculo Científico UIS
| Line 28: | Line 28: | ||
<h5>Installing pre-requisites</h5> | <h5>Installing pre-requisites</h5> | ||
<p>Some previous packages: {{Command|aptitude install apache2-dev}} {{Command|aptitude install libapache2-mod-wsgi}} {{Command|apt-get install debuild}}</p> | <p>Some previous packages: {{Command|aptitude install apache2-dev}} {{Command|aptitude install libapache2-mod-wsgi}} {{Command|apt-get install debuild}}</p> | ||
| − | < | + | <h6>Flask:</h6> |
<p>{{Command|aptitude install python-flask}} Test it by the procedure detailed in http://flask.pocoo.org/</p> | <p>{{Command|aptitude install python-flask}} Test it by the procedure detailed in http://flask.pocoo.org/</p> | ||
| − | < | + | <h6>ClusterShell:</h6> |
<p>{{Command|aptitude install clustershell}} Check the project page for more info http://cea-hpc.github.io/clustershell/</p> | <p>{{Command|aptitude install clustershell}} Check the project page for more info http://cea-hpc.github.io/clustershell/</p> | ||
| − | < | + | <h6>PySlurm:</h6> |
<p>The slurm-web package require pyslurm to be provided by a package called python-pyslurm. In the debian release where this procedure was tested that package didn't exist, so it had to be provided by a dummy package.</p> | <p>The slurm-web package require pyslurm to be provided by a package called python-pyslurm. In the debian release where this procedure was tested that package didn't exist, so it had to be provided by a dummy package.</p> | ||
<p>First, install the real pyslurm using pip {{Command|pip install pyslurm}}</p> | <p>First, install the real pyslurm using pip {{Command|pip install pyslurm}}</p> | ||
| Line 40: | Line 40: | ||
<p>Now, build the package: {{Command|equivs-build python-pyslurm}}</p> | <p>Now, build the package: {{Command|equivs-build python-pyslurm}}</p> | ||
<p>And, install it: {{Command|dpkg -i python-pyslurm_1.0_all.deb}}</p> | <p>And, install it: {{Command|dpkg -i python-pyslurm_1.0_all.deb}}</p> | ||
| − | < | + | <h6>Bootstrap, jQuery y Float:</h6> |
<p>{{Command|aptitude install libjs-bootstrap libjs-jquery-flot libjs-jquery-tablesorter}}</p> | <p>{{Command|aptitude install libjs-bootstrap libjs-jquery-flot libjs-jquery-tablesorter}}</p> | ||
<p>Now, bootstrap must be activated using: {{Command|a2enconf javascript-common}}</p> | <p>Now, bootstrap must be activated using: {{Command|a2enconf javascript-common}}</p> | ||
<p> </p> | <p> </p> | ||
| − | < | + | <h5>Installation of the main package</h5> |
<p>First, it is required to get the latest snapshot of slurm-web from github: {{Command|git clone https://github.com/edf-hpc/slurm-web.git}}. Then, build the package from the project directory: {{Command|debuild -us -uc}}</p> | <p>First, it is required to get the latest snapshot of slurm-web from github: {{Command|git clone https://github.com/edf-hpc/slurm-web.git}}. Then, build the package from the project directory: {{Command|debuild -us -uc}}</p> | ||
<p>Finally, install using dpkg, first the REST api package then the dashboard: {{Command|dpkg -i slurm-web-restapi_1.1.3_amd64.deb}} {{Command|dpkg -i slurm-web-dashboard_1.1.3_amd64.deb}}</p> | <p>Finally, install using dpkg, first the REST api package then the dashboard: {{Command|dpkg -i slurm-web-restapi_1.1.3_amd64.deb}} {{Command|dpkg -i slurm-web-dashboard_1.1.3_amd64.deb}}</p> | ||
<p> </p> | <p> </p> | ||
| − | < | + | <h5>Configuration and customisation</h5> |
<p>In /usr/share/slurm-web/ there is a folder called static. Put a custon logo there. In /etc/slurm-web/ there is a file called racks.xml. That file must be edited. The example for GUANE is presented below, but a more general version is shown in the oficial documentation of slurm-web [http://edf-hpc.github.io/slurm-web/installation.html]</p> | <p>In /usr/share/slurm-web/ there is a folder called static. Put a custon logo there. In /etc/slurm-web/ there is a file called racks.xml. That file must be edited. The example for GUANE is presented below, but a more general version is shown in the oficial documentation of slurm-web [http://edf-hpc.github.io/slurm-web/installation.html]</p> | ||
<p>{{File|nano python-pyslurm|<nowiki><?xml version="1.0" encoding="UTF-8"?><br /><!DOCTYPE rackmap SYSTEM "/usr/share/slurm-web/restapi/schema/dtd/racks.dtd"><br /><rackmap><br /> <nodetypes><br /> <nodetype id="psl390s-1"<br /> model="HP Proliant SL390s"<br /> height="4"<br /> width="0.5"<br /> /><br /> <nodetype id="psl390s-2"<br /> model="HP Proliant SL390s"<br /> height="4"<br /> width="0.5"<br /> /><br /> </nodetypes><br /><br /> <racks><br /><br /> <!-- Rack A1 --><br /> <rack id="guane" posx="0"><br /> <nodes><br /> <nodeset id="guane[01-16]"<br /> type="psl390s-1"<br /> posx="0"<br /> posy="31"<br /> draw="down" /><br /> </nodes><br /> </rack><br /> </racks><br /></rackmap></nowiki>}}</p> | <p>{{File|nano python-pyslurm|<nowiki><?xml version="1.0" encoding="UTF-8"?><br /><!DOCTYPE rackmap SYSTEM "/usr/share/slurm-web/restapi/schema/dtd/racks.dtd"><br /><rackmap><br /> <nodetypes><br /> <nodetype id="psl390s-1"<br /> model="HP Proliant SL390s"<br /> height="4"<br /> width="0.5"<br /> /><br /> <nodetype id="psl390s-2"<br /> model="HP Proliant SL390s"<br /> height="4"<br /> width="0.5"<br /> /><br /> </nodetypes><br /><br /> <racks><br /><br /> <!-- Rack A1 --><br /> <rack id="guane" posx="0"><br /> <nodes><br /> <nodeset id="guane[01-16]"<br /> type="psl390s-1"<br /> posx="0"<br /> posy="31"<br /> draw="down" /><br /> </nodes><br /> </rack><br /> </racks><br /></rackmap></nowiki>}}</p> | ||
<p> </p> | <p> </p> | ||
| − | < | + | <h5>To do:</h5> |
<p>Figure out a distribution independent way of installation. Since it only uses javascript and python, it should be possible to install via "sources" and paths.</p> | <p>Figure out a distribution independent way of installation. Since it only uses javascript and python, it should be possible to install via "sources" and paths.</p> | ||
</div> | </div> | ||
</div> | </div> | ||
</div> | </div> | ||
Revision as of 17:16, 15 October 2015
Back to Job Scheduler Slurm
Slurm-web installation
First, let's review the pre-requisites:
- python
- pyslurm (python module)
- Flask (python module)
- clusterShell (python module)
- bootstrap (javascript library)
- jQuery
- Flot (jQuery extension for graph drawing)
all python modules and javascript libraries ought to be installed via apt packages for the slurm-web installation to work
Installing pre-requisites
Some previous packages:
aptitude install apache2-dev
aptitude install libapache2-mod-wsgi
apt-get install debuild
Flask:
aptitude install python-flask
Test it by the procedure detailed in http://flask.pocoo.org/
ClusterShell:
aptitude install clustershell
Check the project page for more info http://cea-hpc.github.io/clustershell/
PySlurm:
The slurm-web package require pyslurm to be provided by a package called python-pyslurm. In the debian release where this procedure was tested that package didn't exist, so it had to be provided by a dummy package.
First, install the real pyslurm using pip
pip install pyslurm
Test it using the examples shown in http://www.gingergeeks.co.uk/pyslurm/
Then create a dummy package using equivs. First, install equivs if your system doesn't have it:
aptitude install equivs
then create a configuration file for our new package equivs-control python-pyslurm
. Now, we should edit the configuration file for the package to provide python-pyslurm [1]. The package will provide nothing in reality, but the package management system will be fooled into thinking that the package is present. The actual functionality is going to be provided by the pyslurm pip package. The important options are presented below:
File: nano python-pyslurm
Section: misc
Priority: optional
Standards-Version: 3.5.10
Package: python-pyslurm
Provides: python-pyslurm
Architecture: all
Description: Dummy package whichs only purpose is to provide pyslurm
Now, build the package:
equivs-build python-pyslurm
And, install it:
dpkg -i python-pyslurm_1.0_all.deb
Bootstrap, jQuery y Float:
aptitude install libjs-bootstrap libjs-jquery-flot libjs-jquery-tablesorter
Now, bootstrap must be activated using:
a2enconf javascript-common
Installation of the main package
First, it is required to get the latest snapshot of slurm-web from github:
git clone https://github.com/edf-hpc/slurm-web.git
. Then, build the package from the project directory: debuild -us -uc
Finally, install using dpkg, first the REST api package then the dashboard:
dpkg -i slurm-web-restapi_1.1.3_amd64.deb
dpkg -i slurm-web-dashboard_1.1.3_amd64.deb
Configuration and customisation
In /usr/share/slurm-web/ there is a folder called static. Put a custon logo there. In /etc/slurm-web/ there is a file called racks.xml. That file must be edited. The example for GUANE is presented below, but a more general version is shown in the oficial documentation of slurm-web [2]
File: nano python-pyslurm
{{{2}}}
To do:
Figure out a distribution independent way of installation. Since it only uses javascript and python, it should be possible to install via "sources" and paths.
