Difference between revisions of "Debian 7 Infiniband"

Latest revision as of 19:13, 9 April 2015

Infiniband configuration in Debian 7

Install the required software

apt-get -y install infiniband-diags ibutils libmthca ibverbs-utils libibumad libibmad libibverbs1 
libmthca1 libmthca1-dbg libmthca-dev libopensm2 opensm 

Load the kernel Modules

Load the proper linux modules. Edit the file /etc/modules and add the following lines

File: /etc/modules

            #tarjeta Mellanox MT26438
            mlx4_ib

            #IP over IB
            ib_ipoib

            # Protocol modules
            # Common modules
            rdma_ucm
            ib_umad
            ib_uverbs

Then, execute the following commands

            modprobe mlx4_ib
            modprobe ib_ipoib
            modprobe rdma_ucm
            modprobe ib_umad
            modprobe ib_uverbs
             

Subnetting Daemon Configuration

find the available ports in the card.

 ibstat -p 

The output are the identifiers of the ports. Example:

0x78e7d10300244e95

Then, edit the file /etc/default/opensm

And change the following line

PORTS=ALL

Like this

PORTS="0x78e7d10300244e95"

Start The Subnetting Service

Start the opensm service

 /etc/init.d/opensm start 

Configure the Infiniband Interface

Edit the file /etc/network/interfaces and add the following lines

File: /etc/network/interfaces

            auto ib0
            iface ib0 inet static
            address 192.168.38.71
            netmask 255.255.255.0
            broadcast 192.168.38.255

Then, start the interface

 ifup ib0 

Test the interface using the following commands

            ibstat
            ibhosts
             

@@ Line 1: / Line 1: @@
-= Infiniband configuration in Debian 7 =
+__NOTOC__
-== Install the required software ==
+<div class="thumbnail img-thumbnail">http://wiki.sc3.uis.edu.co/images/a/a8/Logo_sc33.png</div>
+<p><div class="btn btn-primary"><i class="fa  fa-long-arrow-left"></i> [[Administración del SC3]]</div></p>
-{{Command|<nowiki> apt-get -y install infiniband-diags ibutils libmthca ibverbs-utils libibumad libibmad libibverbs1 libmthca1 libmthca1-dbg libmthca-dev libopensm2 opensm </nowiki>}}
+<div class="col-md-14">
+    <div class="panel panel-darker-white-border">
+        <div class="panel-heading">
+            <h3 class="panel-title">Infiniband configuration in Debian 7</h3>
+        </div>
+        <div class="panel-body">
+            <p><b>Install the required software</b></p>
+            <p>{{Command|<nowiki>apt-get -y install infiniband-diags ibutils libmthca ibverbs-utils libibumad libibmad libibverbs1
+libmthca1 libmthca1-dbg libmthca-dev libopensm2 opensm </nowiki>}}
+            </p>
+            <p><b>Load the kernel Modules</b></p>
+            <p>Load the proper linux modules. Edit the file '''/etc/modules''' and add the following lines</p>
+            <p>{{File|/etc/modules|<pre><nowiki>
+            #tarjeta Mellanox MT26438
+            mlx4_ib
+            #IP over IB
+            ib_ipoib
-==Load the kernel Modules ==
+            # Protocol modules
+            # Common modules
-Load the proper linux modules. Edit the file '''/etc/modules''' and add the following lines
+            rdma_ucm
+            ib_umad
-{{File|/etc/modules|<pre><nowiki>
+            ib_uverbs
+            </nowiki></pre>}}</p>
-        #tarjeta Mellanox MT26438
+            <p>Then, execute the following commands</p>
-        mlx4_ib
+            <p>{{Command|<nowiki>
+            modprobe mlx4_ib
-        #IP over IB
+            modprobe ib_ipoib
-        ib_ipoib
+            modprobe rdma_ucm
+            modprobe ib_umad
-        # Protocol modules
+            modprobe ib_uverbs
-        # Common modules
+             </nowiki>}}</p>
-        rdma_ucm
+            <p><b>Subnetting Daemon Configuration</b></p>
-        ib_umad
+            <p>find the available ports in the card.</p>
-        ib_uverbs
+            <p>{{Command|<nowiki> ibstat -p </nowiki>}}</p>
+            <p>The output are the identifiers of the ports. Example: </p>
-</nowiki></pre>}}
+            <p>0x78e7d10300244e95</p>
+            <p>Then, edit the file '''/etc/default/opensm'''</p>
-Then, execute the following commands
+            <p>And change the following line</p>
+            <p>        PORTS=ALL</p>
-{{Command|<nowiki> modprobe mlx4_ib
+            <p>Like this</p>
-        modprobe ib_ipoib
+            <p>PORTS="0x78e7d10300244e95"</p>
-        modprobe rdma_ucm
+            <p><b>Start The Subnetting Service</b></p>
-        modprobe ib_umad
+            <p>Start the opensm service</p>
-        modprobe ib_uverbs </nowiki>}}
+            <p>{{Command|<nowiki> /etc/init.d/opensm start </nowiki>}}</p>
+            <p><b>Configure the Infiniband Interface</b></p>
-== Subnetting Daemon Configuration ==
+            <p>Edit the file '''/etc/network/interfaces''' and add the following lines</p>
+            <p>{{File|/etc/network/interfaces|<pre><nowiki>
-find the available ports in the card.
+            auto ib0
+            iface ib0 inet static
-{{Command|<nowiki> ibstat -p </nowiki>}}
+            address 192.168.38.71
+            netmask 255.255.255.0
-The output are the identifiers of the ports. Example:
+            broadcast 192.168.38.255
+            </nowiki></pre>}}</p>
-x78e7d10300244e95
+            <p>Then, start the interface</p>
+            <p>{{Command|<nowiki> ifup ib0 </nowiki>}}</p>
-Then, edit the file '''/etc/default/opensm'''
+            <p>Test the interface using the following commands</p>
+            <p>{{Command|<nowiki>
-And change the following line
+            ibstat
+            ibhosts
-        PORTS=ALL
+             </nowiki>}}</p>
+        </div>
-Like this
+    </div>
+</div>
-        PORTS="0x78e7d10300244e95"
-== Start The Subnetting Service ==
-Start the opensm service
-{{Command|<nowiki> /etc/init.d/opensm start </nowiki>}}
-== Configure the Infiniband Interface ==
-Edit the file '''/etc/network/interfaces''' and add the following lines
-{{File|/etc/network/interfaces|<pre><nowiki>
-        auto ib0
-        iface ib0 inet static
-        address 192.168.38.71
-        netmask 255.255.255.0
-        broadcast 192.168.38.255
-</nowiki></pre>}}
-Then, start the interface
-{{Command|<nowiki> ifup ib0 </nowiki>}}
-Test the interface using the following commands
-{{Command|<nowiki> ibstat
-        ibhosts </nowiki>}}